Model Engineer Index 1898 to Feb 2025

Actions	Year	Date	Volume	Issue	Page	Category	Part	Title	Author	Notes
	1947	06-Mar	96	2,389	263	Locomotive		A Brighter Outlook! (L.N.E.R. "N2" class 0-6-2 suburban tank)
	1947	06-Mar	96	2,389	264	Nautical		Automatic Steering For Model Steamers	A.G.Bates	Control, details and general arrangement of rudder carrier
	1947	06-Mar	96	2,389	269	Locomotive		Standard L.M.S.R. Locomotives		Photographs reproduced to the same scale
	1947	06-Mar	96	2,389	270	Road Locomotive		A 2-in. Scale Traction Engine	D.E.Clapham	Method of fixing horn plates to firebox
	1947	06-Mar	96	2,389	272	Automotive		A Model "Sentinel"		An interesting sequel to a description published in "The Model Engineer," S... more An interesting sequel to a description published in "The Model Engineer," September 12th 1946. Made by F.E.Patten, photo courtesy of The Gas Light and Coke Co.
	1947	06-Mar	96	2,389	273	Workshop		A Gear-Cutting Machine	J.S.Eley	The machine with various spindles, cams and some of the work done by it, th... more The machine with various spindles, cams and some of the work done by it, the carburettor size (side?) and sparking plug side of an "1831" chassis, an "1831" gearboxconclusion
	1947	06-Mar	96	2,389	275	General		"Safety First" on Model Roadways		P.C. Robert Robot directs traffic at Station Road crossing, "danger - men a... more P.C. Robert Robot directs traffic at Station Road crossing, "danger - men at work!" The shopping centre, "wot - no bus queue?" asks the overtaking A.A. Scout
	1947	06-Mar	96	2,389	279	Petrol Engine Topics		A 15-c.c. Four-Cylinder Engine "Seal"	Edgar T.Westbury	Construction, main structural castings, main cylinder and crankcase block, ... more Construction, main structural castings, main cylinder and crankcase block, sectional side elevation and plan, sectional end elevation, camshaft tunnel, boring cylinder seatings, facing sump joint surfaces, valve ports, endplate housings, breather orifice
	1947	06-Mar	96	2,389	284	Stationary Engine		A Mill-Type Steam Engine and Boiler	R.E.Mitchell	The boiler, genral arrangement of boiler
	1947	06-Mar	96	2,389	286	Queries and Replies		No. 8001. Boat Building Methods	G.H.
	1947	06-Mar	96	2,389	286	Queries and Replies		No. 8002. Low-Tension Ignition	P.W.
	1947	06-Mar	96	2,389	286	Queries and Replies		No. 8003. "M.E." Spray Gun	G.R.
	1947	06-Mar	96	2,389	287	Clubs		South London MES
	1947	06-Mar	96	2,389	287	Clubs		Horsham MES
	1947	06-Mar	96	2,389	287	Clubs		Newport (Mon.) DSME
	1947	06-Mar	96	2,389	287	Clubs		The SM&EE
	1947	06-Mar	96	2,389	287	Clubs		Croydon SME
	1947	06-Mar	96	2,389	287	Clubs		Vauxhall Motors RC
	1947	06-Mar	96	2,389	287	Clubs		Mancunian MES
	1947	13-Feb	96	2,388	217	Smoke Rings		Thames Barges (Cover Picture)	Percival Marshall	Inspired by a photograph from a book by E.J.March
	1947	13-Feb	96	2,388	217	Smoke Rings		Model Car Racing	Percival Marshall
	1947	13-Feb	96	2,388	218	Smoke Rings		Talking Models	Percival Marshall	William Denny and Brothers Ltd.
	1947	13-Feb	96	2,388	218	Smoke Rings		The Shipwrights' Exhibition	Percival Marshall
	1947	13-Feb	96	2,388	218	Smoke Rings		Ship Models at Sunderland	Percival Marshall
	1947	13-Feb	96	2,388	218	Smoke Rings		Calling Llangollen	Percival Marshall	E.E.Gilbert
	1947	13-Feb	96	2,388	218	Smoke Rings		Address Wanted	Percival Marshall	Donald Chamberlain
	1947	13-Feb	96	2,388	219	Locomotive		"The Maid of Kent". A new G.W. type 2-6-0 for the 7 1/4-in. gauge Saltwood ... more "The Maid of Kent". A new G.W. type 2-6-0 for the 7 1/4-in. gauge Saltwood Miniature Railway	A.C.Schwab	Quiet and effortless, performance on the road, cab fittings, under war-time... more Quiet and effortless, performance on the road, cab fittings, under war-time conditions
	1947	13-Feb	96	2,388	223	Workshop		A General-Purpose Dividing Head	G.H.Reed	Dividing head and tailstock, layout of parts, dividing head fitted with cir... more Dividing head and tailstock, layout of parts, dividing head fitted with circular table and used in the horizontal position, (photos by Bernard Reed)
	1947	13-Feb	96	2,388	225	Club		The Medway Model and Experimental Society
	1947	13-Feb	96	2,388	226	Lathe		Milling In The Lathe. A review of the principles, appliances and methods em... more Milling In The Lathe. A review of the principles, appliances and methods employed	"Ned"	The "Eureka" milling attachment (by J.B.S.Poyser), the "Myford" dividing at... more The "Eureka" milling attachment (by J.B.S.Poyser), the "Myford" dividing attachment, two views, cutting a bevel gear, Section 6 - Indexing Gear. Simple indexing device and vertical slide for use on the 4" Drummond round-bed lathe, the "Westbury" dividing attachment, front and end elevations, the "Quickset" dividing attachment
	1947	13-Feb	96	2,388	230	Workshop		A Simple Tool (Holder for broken centre drills)	R.James
	1947	13-Feb	96	2,388	231	Workshop		Couplings	Old Gaumless	Oldham's concentre coupling, slipping coupling, shear pin couplings, differ... more Oldham's concentre coupling, slipping coupling, shear pin couplings, differential coupling, flanged coupling with removable disc, claw coupling, expansion coupling, long boss coupling (illustrations by courtesy of Messrs Crofts (Engineers) Ltd.)
	1947	13-Feb	96	2,388	233	Club		Sale Model and Engineering Club
	1947	13-Feb	96	2,388	234	Locomotive		New Standard Locomotives - L.M.S. Railway		Firebox, smokebox, main frames, horn guides and axleboxes, springs and susp... more Firebox, smokebox, main frames, horn guides and axleboxes, springs and suspension, pony truck (and trailing truck of 2-6-2 tank), tender cab tanks and bunker, equipment, engine numbers
	1947	13-Feb	96	2,388	238	Locomotive		Lobby Chat - About Combustion Chambers	LBSC	Douglas Picknell's "Princess Marina", neatness de luxe, straight-line rivet... more Douglas Picknell's "Princess Marina", neatness de luxe, straight-line riveting, enter the "Caterpillar", a fast steamer, the proof of the pudding, various experiment, temperature is what matters! Summing up
	1947	13-Feb	96	2,388	243	Workshop		A Gear-Cutting Machine	J.S.Eley	Showing cam and roller for small spiral gear, setting fly cutter to centre-... more Showing cam and roller for small spiral gear, setting fly cutter to centre-line of machine, operation, steps in production of single-tooth gear cutters, end-milling spindle for cutting keyways, spines (splines?) etc., for cutting large spiral gear
	1947	13-Feb	96	2,388	246	Trade		The "Scope" Lathe (Scope Engineering)		4-in lathe from headstock end, view showing saddle and tailstock fittings, ... more 4-in lathe from headstock end, view showing saddle and tailstock fittings, tailstock with chuck and index plate, using tailstock barrel to carry a shaping tool
	1947	13-Feb	96	2,388	249	Letters		Obsolescent Steam Engines	A.D.S.
	1947	13-Feb	96	2,388	250	Letters		Model Traction Engines	Alan Blount
	1947	13-Feb	96	2,388	250	Letters		Shaded Drawings	K.N.Harris
	1947	13-Feb	96	2,388	250	Letters		Shaded Drawings	Editor
	1947	13-Feb	96	2,388	250	Letters		Reviving the Past	A.B.Storrar
	1947	13-Feb	96	2,388	251	Clubs		The SM&EE
	1947	13-Feb	96	2,388	251	Clubs		Talbot Memorial House MECC
	1947	13-Feb	96	2,388	251	Clubs		Glasgow SME
	1947	13-Feb	96	2,388	251	Clubs		Coventry MES
	1947	13-Feb	96	2,388	251	Clubs		Kent MES
	1947	13-Feb	96	2,388	251	Clubs		Merseyside LS
	1947	13-Feb	96	2,388	251	Clubs		Eccles DMES
	1947	13-Feb	96	2,388	252	The Ship Model Societies		Sheffield SMS, SMS of North-West London, SMS Metropolitan Committee, SMS So... more Sheffield SMS, SMS of North-West London, SMS Metropolitan Committee, SMS South-West London, SMS, Birmingham, Kingston and District, SMS of Ilford, SMS of North London	"Jason"
There are no records to display